Introduction
An anthracite finish is a painted coating with a clean, industrial look. To keep it looking its best, handle with care: avoid scratches and knocks, clean gently, and dry thoroughly. Below you’ll find exactly what to do—and what not to do.
What is an anthracite finish?
Anthracite is a painted topcoat. This layer can be damaged by impacts, scratches or sharp objects (think jewellery, keys or other metals). Operate and install the hardware carefully and avoid any unconventional force during use or fitting.
Day-to-day use: preventing scratches
-
Avoid contact with hard surfaces and sharp edges.
-
Be mindful of rings, bracelets, keys and tools near the hardware.
-
During operation and installation: slow and straight, without excessive force.
Cleaning: the right way
-
Use only mild detergent, water, and a non-abrasive cloth.
-
Wipe gently in circular motions, then dry with a clean, soft cloth.
-
Monthly cleaning is recommended for hygiene and to preserve the finish.
Absolutely avoid (will damage the finish)
-
Harsh cleaners or solvents (including paint thinners/compounds).
-
Abrasives and abrasive cloths/sponges.
-
Metal polishes (can cause discolouration and scratching).
-
Immersing in liquid or leaving items wet (risk of blistering/chipping).
Practical tips
-
Install with the correct screws and low RPM; avoid bit cam-out.
-
Use soft (microfibre) cloths and refresh water to prevent grit scratches.
-
Always test a new cleaner on an inconspicuous area first.
-
See micro-scratches starting? Stop polishing—more pressure makes it worse.
Product examples (industrial pairings)
Looking for details that match an anthracite finish? These brass pieces in an anthracite-colour finish keep the look consistent and tactile:
-
T-knob “Knurled” — anthracite finish: T-knob “Knurled”
-
Pull handle “Lines” — anthracite finish: Pull handle “Lines”
Tip: Keep a tone-on-tone look by pairing anthracite hardware with anthracite-finish details—and use the same mild cleaning routine across all pieces.
Closing
With gentle cleaning, soft cloths and careful handling, an anthracite finish will stay beautiful for a long time. Avoid aggressive agents and mechanical wear, and plan a quick monthly wipe-down—that way your hardware keeps its crisp, deep tone.